Z series

Diameters & Axial Extend

No. of Positions in Hub:	d1	s	Maximum Diameters for Blade Types:
			1Z	2Z	3Z	4Z	5Z	6Z	TR7Z	TR8Z	ZREV
5	5.71	0.28	20.9-21.1	25.2-26.2	25.6	30.3	40.6	40.4	34.1	37.2	30.9
6	7.01	0.28	22.0-22.4	26.5-27.4	26.9	31.6	41.9	41.7	35.4	38.5	32.2
7	7.32	0.28	22.4-22.7	26.8-27.8	27.2	31.9	42.2	42.0	35.7	38.8	32.5
8	10.47	0.28	25.4-25.7	29.8-30.7	30.4	35.0	45.4	45.1	38.8	42.0	35.7
9	7.87	0.28	22.9-23.2	27.3-28.3	27.8	32.4	42.8	42.5	36.2	39.4	33.1
12	11.02	0.35	25.9-26.2	30.4-31.2	30.9	35.6	45.9	45.7	39.4	42.5	36.2
16	14.76	0.35	29.5-29.8	33.9-34.6	34.6	39.3	49.6	49.4	43.1	46.3	40.0

The max. diameter of sickle impellers depends on the blade angle. Contact Multi-Wing or use the Optimiser to get specifics.

Leading edge v±2
Pitch	15º	20º	25º	27,5º	30º	32,5º	35º	37,5º	40º	45º	50º
1Z	-	0.98	1.06	-	1.18	1.22	1.26	1.30	1.34	1.38	-
2Z	-	1.30	1.42	-	1.54	1.57	1.65	1.69	1.73	1.81	-
3Z	-	-	0.51	-	0.59	0.67	0.71	0.79	0.83	0.94	1.06
4Z	-	0.47	0.59	-	0.75	0.79	0.87	0.94	1.02	1.14	-
5Z	-	-	0.67	-	0.87	0.98	1.06	1.14	1.22	1.34	1.50
6Z	-	0.24	0.47	0.59	0.71	0.83	0.94	-	-	-	-
TR7Z	-	0.91	1.06	-	1.26	1.38	1.42	-	1.57	1.69	-
TR8Z	-	1.14	1.34	-	1.50	1.61	1.69	1.77	1.85	2.01	-
ZREV	19	0.91	1.06	1.14	1.22	1.30	1.38	-	1.54	-	-

All dimensions are in inch. The values are intended primarily as a guide and can be subject to variations depending on the material.

Trailing edge h±2
Pitch	15º	20º	25º	27,5º	30º	32,5º	35º	37,5º	40º	45º	50º
1Z	-	1.61	1.81	-	2.01	2.13	2.24	2.36	2.48	2.72	-
2Z	-	2.05	2.28	-	2.52	2.68	2.83	2.99	3.15	3.46	-
3Z	-	-	1.18	-	1.26	1.30	1.34	1.42	1.50	1.61	1.73
4Z	-	1.14	1.38	-	1.57	1.69	1.77	1.85	1.93	2.05	-
5Z	-	-	1.65	-	1.89	2.01	2.09	2.20	2.32	2.48	2.64
6Z	-	1.57	1.73	1.81	1.89	1.97	2.05	-	-	-	-
TR7Z	-	0.91	1.06	-	1.26	1.38	1.42	-	1.57	1.69	-
TR8Z	-	1.14	1.34	-	1.50	1.61	1.69	1.77	1.85	2.01	-
ZREV	19	0.91	1.06	1.14	1.22	1.30	1.38	-	1.54	-	-

All dimensions are in inch. The values are intended primarily as a guide and can be subject to variations depending on the material.