W series

Diameters & Axial Extend

No. of Positions in Hub:	d1	s	Maximum Diameters for Blade Types:
No. of Positions in Hub:	d1	s	1W	2W	3W	5W	6W*	7W	8W	9W*	TR11W
3LP, 4LP, 5LP	7.87	0.31	35.6-35.9	-	-	-	45.6	-	48.3	-	-
5, 6	10.79	0.61	38.1-38.8	48.8-49.3	70.3	44.1	48.5	60.5	51.2	70.3	49.2
8	14.96	0.61	41.9-42.6	52.6-53.3	73.9-74.4	48.3	52.7	64.6	55.4	74.4	53.4
10	18.50	0.67	45.2-45.9	55.8-56.9	77.2-78.0	51.9	56.2	68.2	58.9	78.0	56.9
13	24.72	0.98	51.5-52.1	62.0-63.1	83.4-84.3	58.1	62.5	74.5	65.2	84.3	63.2

LP = Light duty cast hub. 5, 6, 8 and 10 bladed hubs also come as a reinforced (HP) version for heavy duty applications.
All dimensions are in inch. The values are intended primarily as a guide and can be subject to variations depending on the material. The max. diameter of sickle impellers depends on the blade angle. Contact Multi-Wing or use the Optimiser to get specifics.
* Subtract 7.3" from max diameter in table above for 9W/AL, add 0.7" to max diameter for 6W/AL.

Leading edge v±2
Pitch	15º	20º	25º	30º	35º	40º	45º	50º
1W	1.02	1.14	1.26	1.38	1.54	1.61*	1.73*	1.85*
2W	1.50	1.69	1.85	2.05*	2.20*	2.32*	2.48*	2.56*
3W	-	2.24	2.56	2.83	3.11	3.35	3.54	3.74
5W	-	0.71	0.98	1.26	1.50	1.73	1.97	2.20
6W	-	-	1.18	1.46	1.69	1.97	2.28	2.40
7W	-	0.98	1.22	1.42	1.65	1.85	2.05	2.20
8W	0.87	1.14	1.42	1.54	1.65	2.05	2.40	2.68
9W	-	1.22	1.46	1.77	2.01	2.32	2.56	2.83
TR11W	-	1.42	1.73	2.05	2.36	2.64	2.87	3.11

All dimensions are in inch. The values are intended primarily as a guide and can be subject to variations depending on the material.
* The leading blade tip reaches further out than the leading edge v in it's max. diameter

Trailing edge h±2
Pitch	15º	20º	25º	30º	35º	40º	45º	50º
1W	2.69	1.97	2.28	2.64	2.91	3.35	3.74	4.09
2W	3.15	3.46	3.98	4.57	5.12	5.67	6.18	6.61
3W	-	4.53	5.55	6.50	7.44	8.27	9.09	9.80
5W	-	1.85	2.17	2.48	2.76	3.03	3.27	3.50
6W	-	-	2.56	2.95	3.31	3.66	3.98	4.17
7W	-	2.48	2.83	3.15	3.50	3.78	4.06	4.33
8W	1.93	2.24	2.56	2.72	2.87	3.23	2.46	3.70
9W	-	2.83	3.31	3.74	4.13	4.53	4.84	5.12
TR11W	-	1.42	1.73	2.05	2.36	2.64	2.87	3.11

All dimensions are in inch. The values are intended primarily as a guide and can be subject to variations depending on the material.