H series

Diameters & Axial Extend

No. of Positions in Hub:	d1	s	Maximum Diameters for Blade Types:
			1H	2H	3H	4H	6H
6	3.82	0.24	16.6	16.2	23.5	21.9	23.5
8	5,28	0.24	18.0	17.6	25.0	23.4	25.0
10	6.77	0.28	19.5	19.1	26.5	24.9	14.6
12	8.11	0.31	20.8-20.9	20.5	27.8	26.2	27.8
14	9.53	0.31	22.2-22.3	21.9	29.2	27.6	29.2

The max. diameter of sickle impellers depends on the blade angle. Contact Multi-Wing or use the Optimiser to get specifics.

Leading edge v±2
Pitch	15º	20º	25º	30º	35º	40º	45º	50º
1H	-	-	0.55	0.66	0.75	0.79	0.83	0.91
2H	-	-	0.43	0.51	0.59	0.67	0.75	-
3H	-	-	0.51	0.59	0.71	0.83	0.94	1.02
4H	-	-	0.51	0.59	0.67	0.75	0.83	0.91
6H	0.12	0.20	0.31	0,43	0.51	0.67	0.79	-

All dimensions are in inch. The values are intended primarily as a guide and can be subject to variations depending on the material.

Trailing edge h±2
Pitch	15º	20º	25º	30º	35º	40º	45º	50º
1H	-	-	1.34	1.54	1.73	1.85	1.97	2.09
2H	-	-	0.79	0.91	0.98	1.10	1.18	-
3H	-	-	1.14	1.26	1.34	1.50	1.61	1.77
4H	-	-	1.46	1.65	1.85	2.05	2.24	2.40
6H	0.63	0.75	0.83	0.91	0.98	1.06	1.14	-

All dimensions are in inch The values are intended primarily as a guide and can be subject to variations depending on the material.